1M CAT6 UTP Patch cable in Brown

Introduction

Category 6 cable is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e cables. Cat 6 has to meet more stringent specifications for crosstalk and system noise than Cat 5 and Cat 5e. The cable standard specifies performance of up to 250 MHz, compared to 100 MHz for Cat 5 and Cat 5e.

Our Category 6 patch cable supports high speed data networks for gigabit applications, and is fully tested to meet TIA/EIA Category 6 channel requirements. It is made from high purity 4 pair 24AWG stranded wire. It is pre-terminated with RJ45 plugs plus snagless boots and strain/bending reliefs. These design features can increase the flexibility and provide effective protection against damages to the cable.

Cable Structure

• 24 AWG stranded copper conductor
• PE insulation
• PE central cross
• CM Rated FR PVC jacket
• OD=6.0mm
• 50u Gold-plated 8P8C connector

 Standards

• Australian AS/CA S008:2010
• ACMA Approved N18767
• ANSI/TIA 568C.2
• ISO/IEC 61156-6
• EN 50288-6-2
• ISO/IEC 11801
• EN 50173
• UL Approved UL80034
• ETL Verified & Approved E188601-T
• ROHS

Applications

• 1000Base-TX ( TIA/EIA-854 )
• 1000Base-T ( IEEE 802.3ab )
• 100Base-TX ( IEEE 802.3u )
• 10Base-T ( IEEE 802.3 )
• Patch panel to patch panel connections
• PC to information outlet connections
• Information outlet to telecommunications closet connections
• Equipment & DTE connections

Flame Rating

• UL 444, CM Rated
• ISO/IEC 60332-1

Operating Temperature

• -20℃ to 60℃