1M External Mini SAS HD SFF-8644 To 4 x SAS 29F with Molex Power

Introduction

The External Mini SAS HD SFF-8644 to 4 x SAS 29F with Molex Power cable is a type of cable used to connect external SAS devices such as hard drives, tape drives, or RAID systems to a computer or server.

The cable features an external Mini SAS HD connector on one end and four SAS 29-pin connectors on the other end. The Mini SAS HD connector is a high-density connector that provides high-speed data transfer rates of up to 12 Gbps per lane.

The four SAS 29-pin connectors are used to connect up to four SAS devices to the computer or server. These connectors are typically used for connecting SAS drives, but they can also be used for other types of SAS devices.

The cable also features a Molex power connector, which provides power to the connected SAS devices. This is important because SAS devices require both data and power connections to function properly.

Overall, the External Mini SAS HD SFF-8644 to 4 x SAS 29F with Molex Power cable is a reliable and efficient way to connect multiple SAS devices to a computer or server.

Specifications

• Cable length: The cable length can vary depending on the manufacturer and model, but it is typically between 0.5 to 1 meters.
• Connector type: The Mini SAS HD connector is a 36-pin connector with a pitch of 0.8mm, while the SAS 29-pin connectors have a pitch of 1.27mm.
• Data transfer rate: The cable supports data transfer rates of up to 12 Gbps per lane, which is the maximum speed for SAS 3.0.
• Power rating: The Molex power connector typically provides 12V and 5V power to the SAS devices, with a maximum power rating of around 4.5A.
• Compatibility: The cable is compatible with SAS controllers and SAS devices that use SAS 3.0 or earlier standards.