30M CAT6 Crossover UTP Patch cable in Red

Introduction

Category 6 cable is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e cables. Cat 6 has to meet more stringent specifications for crosstalk and system noise than Cat 5 and Cat 5e. The cable standard specifies performance of up to 250 MHz, compared to 100 MHz for Cat 5 and Cat 5e.

Our Category 6 patch cable supports high speed data networks for gigabit applications, and is fully tested to meet TIA/EIA Category 6 channel requirements. It is made from high purity 4 pair 24AWG stranded wire. It is pre-terminated with RJ45 plugs plus snagless boots and strain/bending reliefs. These design features can increase the flexibility and provide effective protection against damages to the cable.

An Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. It is most often used to connect two devices of the same type, e.g. two computers (via their network interface controllers) or two switches to each other.

Cable Structure

• 24 AWG stranded copper conductor
• PE insulation
• PE central cross
• CM Rated FR PVC jacket
• OD=6.0mm
• 50u Gold-plated 8P8C connector

•  Cable pin-out uses T568A to T568B ( as shown below )

Standards

• Australian AS/CA S008:2010
• ACMA Approved N18767
• ANSI/TIA 568C.2
• ISO/IEC 61156-6
• EN 50288-6-2
• ISO/IEC 11801
• EN 50173
• UL Approved UL80034
• ETL Verified & Approved E188601-T
• ROHS

Applications

• 1000Base-TX ( TIA/EIA-854 )
• 1000Base-T ( IEEE 802.3ab )
• 100Base-TX ( IEEE 802.3u )
• 10Base-T ( IEEE 802.3 )
• Patch panel to patch panel connections
• PC to information outlet connections
• Information outlet to telecommunications closet connections
• Equipment & DTE connections

Flame Rating

• UL 444, CM Rated
• ISO/IEC 60332-1

Operating Temperature

• -20℃ to 60℃