5M Aust 15A 3Pin Plug to IEC C19 Power Cable

Introduction

This power cable with a 15A Australian wall plug on one end and an IEC C19 connector on the other end is commonly used to connect high-powered IT equipment to an Australian power source. The IEC C19 connector is designed to handle high currents and is commonly found on servers, switches, and other network equipment. The IEC C19 connector is typically rated for currents up to 16 amps, which should be sufficient for most high-powered IT equipment. This power cable is made from high quality materials and meets Australian safety standards.

This power cable needs to be used on a 15A power outlet.

The Australian 15A power outlet is a type of electrical outlet used in Australia and New Zealand. It has three rectangular prongs arranged in a triangular shape, with the top prong being slightly larger than the other two. The 15A rating means that it can handle a maximum current of 15 Amps.

It is recommended to have a qualified electrician install a 15A power outlet, as it requires a dedicated circuit and special wiring to handle the higher current load. It is also important to use appropriate electrical safety precautions when using any electrical device or outlet.

 Specifications

• With Australian Electrical Safety Approvals and comply with AS/NZS 3112 standard
• Size of conductors: 3x1.5mm2
• Jacket materials: H05VV-F, 300/500V 60227 IEC53
• Power Rating: 3Pin Plug 15A 250V, IEC C19 16A 250V
• Colour: Black
• Wiring Colours: E: Yellow/Green, N: Blue, L: Brown